series MIP

0.6/1kV

1 up to 630 mm²

EPR/TPU

Heavy Duty

The materials used in their manufacture combine high strength and flexibility, providing adequate protection against chemicals, harsh environments, tears, and impacts. Cables required for heavy industrial use (Heavy Duty) such as drilling and mining equipment in general. The cable sheath has 2 longitudinal orange traces on cables with diameters up to 30mm and one orange trace on cables with larger diameters.

Features

Maximum operating temperature: 90°C for fixed installation / 60°C for mobile use and occasional bending
Minimum ambient temperature: -40°C in fixed installation / -25°C for occasional bending
Rated voltage: 600/1000 Volt AC, 1200 Volt AC (Maximum) / 1500 Volt DC
Construction standard: IEC 60502-1 Guidelines
Conductors standard: IRAM NM 280 – IEC 60228
Conductor: Class 5 Flexible Formation Annealed Electrolytic Copper
Insulation: EPR
Cover: Polyurethane resistant to UV rays, hydrocarbons and chemicals in general.
Fire standard: IEC 60332-1
Weathering standard: UL 2556 (UV rays)
Hydrocarbon resistance standard: UIC 895 OR (oil, gas oil and fuel oil) / UL 13 (oil) / UL 83 (Fuel C: toluene and isoctane)
Bending test: Mercosur NM 247-2, tested with 150,000 double bending cycles
Permanent immersion test in water: AD8

Flame retardant

Tear and impacts

High sliding

High flexibility

UV resistant

Harsh environment

Identification

	Deck	Drivers
1 Conductor	+ Orange traces
2 Conductors	+ Orange traces
3 Conductors	+ Orange traces
4 Conductors	+ Orange traces

Instalation

Installation temperature

Over conductors

Minimum bend radius

Constructive variants

The information supplied corresponds to the standard version; upon request these cables can be supplied with another color cover.

Download PDF

ELECTRICAL CHARACTERISTICS

Resistances and Reactances

Nominal section (mm²)	Electrical resistance at 20°C in D.C. (Ohm/km)	Electrical resistance at 90°C in AC (Ohm/km)	Inductive reactance at 50Hz. (Ohm/Km)
			1 Conductor (1)	1 Conductor (2)	1 Conductor (3)	Multiconductor (4)	4 Conductors (5)

1	19.5	24.86	0.173	0.217	0.159	0.120	0.127
1.5	13.3	16.96	0.163	0.206	0.148	0.112	0.119
2.5	7.98	10.18	0.151	0.195	0.137	0.103	0.111
4	4.95	6.31	0.142	0.186	0.128	0.097	0.104
6	3.3	4.21	0.133	0.176	0.118	0.091	0.098
10	1.91	2.44	0.122	0.166	0.108	0.084	0.092
16	1.21	1.54	0.116	0.159	0.101	0.080	0.088
25	0.78	0.99	0.112	0.156	0.097	0.080	0.087
35	0.554	0.707	0.108	0.152	0.093	0.078	0.085
50	0.386	0.493	0.105	0.149	0.091	0.077	0.085
70	0.272	0.348	0.101	0.144	0.086	0.074	0.082
95	0.206	0.264	0.099	0.143	0.085	0.074	0.081
120	0.161	0.207	0.097	0.141	0.083	0.072	0.080
150	0.129	0.167	0.096	0.140	0.082	0.072	0.080
185	0.106	0.138	0.096	0.140	0.082	0.072	0.080
240	0.0801	0.105	0.095	0.138	0.080	0.072	0.079
300	0.0641	0.0858	0.094	0.137	0.079	0.071	0.079
400	0.0486	0.0672	0.093	0.136	0.078	--	--
500	0.0384	0.0554	0.092	0.135	0.077	--	--
630	0.0287	0.0448	0.090	0.134	0.076	--	--

(1) Three unipolar cables arranged in a plane in contact with each other. (2) Three unipolar cables arranged in a plane separated by one diameter from each other. (3) Three unipolar cables arranged in a cloverleaf pattern in contact with each other. (4) Inductive reactance calculation valid for bipolar and tripolar cables (5)Calculation of inductive reactance valid for four-pole cables.

Admissible current intensity

Nominal section (mm²)	Admissible cable current in air. At 40°C according to IEC 364-5-523. Single-core cables up to 16mm² in contact with each other arranged in solid trays, rest of sections, single-core arrangements and formations in perforated or ladder-type trays. (Ampere)					Admissible intensity of directly buried cables. At 25°C soil temperature and soil thermal resistivity of 1 km/W. according to IEC 364-5-523. (Ampere)
	1 Conductor (1)	1 Conductor (2)	1 Conductor (3)	2 Conductors	Multiconductor (4)	1 Conductor (1)	1 Conductor (2)	2 Conductors	Multiconductor (4)

1	--	--	--	--	--	--	--	--	--
1.5	19	--	--	23	20	32	35	32	28
2.5	26	--	--	31	28	43	46	44	37
4	34	--	--	43	36	55	59	57	48
6	45	--	--	54	47	69	74	72	61
10	62	--	--	74	65	93	100	97	83
16	83	--	--	100	86	121	129	129	107
25	122	158	117	128	109	157	168	166	141
35	152	196	146	160	137	188	201	200	168
50	187	238	179	195	166	220	236	238	199
70	241	305	232	250	213	271	290	292	243
95	295	371	283	304	257	326	349	351	293
120	346	432	332	354	299	371	396	399	333
150	401	499	384	409	345	415	444	448	373
185	461	572	441	468	394	470	503	508	425
240	548	675	524	554	465	547	586	592	493
300	637	780	608	640	537	621	665	669	559
400	751	938	712	--	--	710	759	--	--
500	863	1083	818	--	--	825	882	--	--
630	995	1257	941	--	--	941	1007	--	--

(1) Three unipolar cables arranged in a plane in contact with each other. (2) Three unipolar cables arranged in a plane separated by one diameter from each other. (3) Three unipolar cables arranged in a cloverleaf pattern in contact with each other. (4) These reported allowable intensity values correspond to three- and four-pole cables.

Dimensions and weights

Cable formation No. Cond. x section (mm²)	Outer diameter mm	Weight kg/km	Código	Mat Number
1 x 1	5,7	33	830032010	MIP 1x1
1 x 1.5	5,9	39	830032020	MIP 1x1.5
1 x 2.5	6,4	49	830032030	MIP 1x2.5
1 x 4	6,9	66	830032040	MIP 1x4
1 x 6	7,4	85	830032050	MIP 1x6
1 x 10	8,4	128	830032060	MIP 1x10
1 x 16	9,4	182	830032070	MIP 1x16
1 x 25	11	271	830032080	MIP 1x25
1 x 35	12,2	364	830032090	MIP 1x35
1 x 50	14	503	830032100	MIP 1x50
1 x 70	15,7	690	830032110	MIP 1x70
1 x 95	17,7	895	830032120	MIP 1x95
1 x 120	19,4	1.138	830032130	MIP 1x120
1 x 150	22,2	1.424	830032140	MIP 1x150
1 x 185	24,7	1.757	830032150	MIP 1x185
1 x 240	27,4	2.258	830032160	MIP 1x240
1 x 300	31,5	2.846	830032170	MIP 1x300
1 x 400	34,1	3.694	830032180	MIP 1x400
1 x 500	37,7	4.627	830032190	MIP 1x500
1 x 630	42,1	6.126	830032200	MIP 1x630
2 x 1	9,6	91	830032210	MIP 2x1
2 x 1.5	10	105	830032220	MIP 2x1.5
2 x 2.5	10,9	133	830032230	MIP 2x2.5
2 x 4	12	175	830032240	MIP 2x4
2 x 6	13,1	224	830032250	MIP 2x6
2 x 10	15	332	830032260	MIP 2x10
2 x 16	19	579	830032270	MIP 2x16
2 x 25	22,3	841	830032280	MIP 2x25
2 x 35	24,6	1.092	830032290	MIP 2x35
2 x 50	28,2	1.488	830032300	MIP 2x50
2 x 70	31,7	1.992	830032310	MIP 2x70
2 x 95	36,1	2.589	830032320	MIP 2x95
2 x 120	39,7	3.249	830032330	MIP 2x120
2 x 150	45,5	4.130	830032340	MIP 2x150
2 x 185	50,7	5.121	830032350	MIP 2x185
2 x 240	56,1	6.467	830032360	MIP 2x240
2 x 300	64,4	8.270	830032370	MIP 2x300
3 x 1	10,1	105	830032380	MIP 3x1
3 x 1.5	10,6	123	830032390	MIP 3x1.5
3 x 2.5	11,5	160	830032405	MIP 3x2.5
3 x 4	12,7	214	830032410	MIP 3x4
3 x 6	13,9	280	830032420	MIP 3x6
3 x 10	16	424	830032430	MIP 3x10
3 x 16	20,1	715	830032440	MIP 3x16
3 x 25	23,7	1.051	830032450	MIP 3x25
3 x 35	26,2	1.380	830032460	MIP 3x35
3 x 50	30,1	1.893	830032470	MIP 3x50
3 x 70	34,4	2.606	830032480	MIP 3x70
3 x 95	38,7	3.345	830032490	MIP 3x95
3 x 120	42,5	4.221	830032500	MIP 3x120
3 x 150	49,2	5.381	830032510	MIP 3x150
3 x 185	54,4	6.609	830032520	MIP 3x185
3 x 240	60,6	8.446	830032530	MIP 3x240
3 x 300	69,3	10.696	830032540	MIP 3x300
4 x 1	10,9	124	830032650	MIP 4x1
4 x 1.5	11,5	146	830032660	MIP 4x1.5
4 x 2.5	12,6	193	830032675	MIP 4x2.5
4 x 4	13,8	261	830032685	MIP 4x4
4 x 6	15,2	345	830032695	MIP 4x6
4 x 10	17,5	530	830032700	MIP 4x10
4 x 16	21,9	879	830032715	MIP 4x16
3 x 25 + 1x 16	24,9	1.195	830033730	MIP 3x25+1x16
3 x 35 + 1 x 16	27	1.508	830033740	MIP 3x35+1x16
3 x 50 + 1 x 25	31,5	2.111	830033750	MIP 3x50+1x25
3 x 70 + 1 x 35	35,8	2.891	830033760	MIP 3x70+1x35
3 x 95 + 1 x 50	40,7	3.774	830033770	MIP 3x95+1x50
3 x 120 + 1 x 70	45,4	4.872	830033780	MIP 3x120+1x70
3 x 150 + 1 x 70	50,7	5.918	830033790	MIP 3x150+1x70
3 x 185 + 1 x 95	56	7.302	830033800	MIP 3x185+1x95
3 x 240 + 1 x 120	62,5	9.361	830033810	MIP 3x240+1x120
3 x 300 + 1 x 150	71,6	11.834	830033820	MIP 3x300+1x150